Verify every kWh of savings.
Automatically.
Opnor EMIS monitors your implemented ECMs against their engineered baseline — continuously, automatically, to IPMVP and ISO-50015 compliance. Your Hydro-Québec post-measurement reports write themselves. Your CFO sees real savings, not projected ones.
Live baseline-vs-actual. Every meter. Every ECM.
Opnor EMIS ingests your utility meters, sub-meters, and process-level signals at 5-minute intervals. Normalizes everything against an engineered baseline model (weather, production output, operating hours). Flags variance as it happens.
- Regression-based baseline with P.Eng. sign-off — not a rolling average
- Weather + production normalization — separates savings from operational drift
- Per-meter, per-ECM, and whole-facility variance views
- 5-min streaming interval · stored indefinitely · API-queryable
Which ECMs are delivering. Which aren't.
Every implemented ECM gets tracked against the savings that were engineered for it during the audit. When realization drops below threshold, we flag it — usually early enough to troubleshoot before it becomes a quarterly miss.
- Per-ECM realization factor — measured savings as % of modeled savings
- Three-tier alerting: green (≥90%), amber (70–90%), red (<70%)
- Root-cause hints — points at likely causes (commissioning drift, sensor failure, operational change)
- Monthly portfolio view — executive-ready rollup across all active ECMs
IPMVP, ISO-50015, Hydro-Québec. Reports that write themselves.
Every period end, EMIS auto-generates the M&V reports your compliance stakeholders need. IPMVP Option C whole-facility regression, Hydro-Québec post-audit savings verification, ISO-50015-conformant annual measurement reports. P.Eng. sign-off included.
- IPMVP Options A, B, C, D supported out of the box
- Hydro-Québec Solutions efficaces post-measurement report format
- ISO-50015 annual energy performance reports
- Custom internal rollups — brand + format configurable
- Every report carries a P.Eng. signature line · auditable source data retained
12-month measurement period · reporting year 1
Works alongside your existing SCADA, BMS, and utility data.
EMIS is a read-only overlay — not a rip-and-replace. We connect to your existing data sources, normalize everything to IPMVP-grade baselines, and leave your operational systems untouched.
Subscription. Priced per site.
No per-meter gotchas. No data-volume tiers. Sized to your site — depends on ECM portfolio depth, integration scope, and how complex your facility is. We'll quote firm numbers after a quick scoping conversation, not on the marketing page.
30 minutes. No prep needed.
We'll walk you through it.
A guided walkthrough of the platform plus Q&A on whether EMIS fits your facilities setup. Bring questions, not data — we won't try to wire anything up live on the call.